QX56 V8-5.6L (VK56DE) (2004)
/Page-2182011.png)
a.
Remove the mounting clip from the white rectangle connector as shown in Figure 16.
^
This connector is in the front opening.
b.
Hang the console from the front support hook as shown in Figure 17.
c.
Reconnect all of the electrical connectors.
d.
Cut a piece of self adhesive urethane foam pad about 1 inch wide and 5 inches long.
^
Use foam pad P/N 76268-9E005 from the Squeak and Rattle Kit.
