QX56 V8-5.6L (VK56DE) (2004)
/Page-2276015.png)
a.
Insert a medium size flat blade screw driver as shown in Figure 9.
b.
Carefully separate the sheet metal and install a piece of felt cloth tape in between the window channel and inner door sheet metal as shown
in Figure 9.
^
The sheet metal may be stuck together with paint. A pop noise may occur when the paint is broken.
^
Felt cloth tape 68370-4B000 (listed in the Parts Information) is pre cut into 4 pieces. One piece is all you need for this.
12.
Test drive the vehicle to make sure the noise is gone.
13. Reinstall all parts removed.
Disclaimer
