QX56 V8-5.6L (VK56DE) (2004)
Rear Door Window Glass: Adjustments
REAR DOOR GLASS AND REGULATOR
FITTING INSPECTION
-
Check that the glass is securely fit into the glass run groove.
-
Lower the glass slightly [approximately 10 to 20 mm (0.39 to 0.79 in)], and check that the clearance to the sash is parallel. If the clearance
between the glass and sash is not parallel, loosen the regulator mounting bolts, guide rail mounting bolts, and glass and carrier plate mounting bolts
to correct the glass position.