QX56 V8-5.6L (VK56DE) (2004)
/Page-2410010.png)
26.
Snap the cover back onto the actuator.
27.
Re-assemble the seat in reverse order.
28.
Check the seat latch-to-striker contact.
^
Latch and unlatch the seat a few times.
^
Both latches should contact the strikers at the same time.
A.
If the latches are working correctly (contacting the strikers at the same time) proceed to step 30.
B.
If the latches are not contacting the strikes at the same time, perform step 29.
29.
Adjust the latch-to-striker contact as follows:
