QX56 V8-5.6L (VK56DE) (2004)
7.
Move the power seat cushion UP using the power seat switch.
8.
Apply lubricant to the lower edge of the seat cushion material.
^
Rub the rag along the edges that touch the side finisher.
^
Make sure to rub (apply) the lubricant on the inside of the edge and the bottom of the edge.
9.
Apply lubricant around the outer edge of the switch trim.
^
Make sure to rub (apply) the lubricant between the trim edge and the seat material.
10.
Test-drive the vehicle to make sure the noise is gone.