QX56 V8-5.6L (VK56DE) (2004)
Service Procedure
Replace the Rear Spoiler as follows:
NOTE:
Use suitable covers to protect upholstery, carpet, paint, trim, etc. when performing this procedure.
1.
Remove the rear Hatch Upper Finisher by pulling down to release the securing clips (see Figure 1).
^
Be careful not to damage the Metal Clip and the Molded Plastic Clips at each end of the Finisher (see Figure 1).
2.
Remove the two Rear Spoiler Nuts (see Figure 2).
3.
Remove the Rear Spoiler as follows: