QX56 V8-5.6L (VK56DE) (2004)
^
AIR LEVELIZER (if applicable)
6.
After all DTCs are erased:
^
Turn the ignition switch OFF.
^
Disconnect CONSULT-II and the CAN Cable from the vehicle connector.
^
Disconnect the battery charger from the vehicle.
^
Start the engine and make sure it runs properly and there are NO warning lights illuminated in the instrument panel.
7.
Continue with Part 4.
Part 4
Part 4:
Re-program the 8 MB (orange) Reprogramming Card back to its original format so it can be used for standard ECU reprogramming.
1.
Remove the red/white diagnostic card from CONSULT-II and insert the 8 MB orange Reprogramming card.
2.
Go to the ASIST terminal.
3.
Follow steps in Part I of this bulletin to download (transfer) data from ASIST to CONSULT-II.
^
Use ID Code 050602.
^
This will re-program the 8 MB (orange) card to its original format so it can be used for standard ECU reprogramming.
END