QX56 V8-5.6L (VK56DE) (2004)
2.
Pull the carpet down and fold back the rubber insulation flap (see Figure 1).
3.
Measure the "free" height from the metal floor to the top-center of the brake pedal (pedal all the way up).
NOTE:
The Brake Pedal Height Tool J-46532 (an "essential tool") is available from TECH-MATE at 1-800-662-2001.
^
Position the Brake Pedal Height Tool as shown in Figure 1.
^
Pedal height should be:
>
182.3 mm - 192.3 mm.
>
Preferred setting is about 187 mm.
^
If pedal height adjustment is needed refer to section BR in the Service Manual (ESM) for height adjustment information.