QX56 V8-5.6L (VK56DE) (2004)
Brake Pedal Assy: Service and Repair
Non-Adjustable Pedal
Part 2 Of 2
Removal and Installation
REMOVAL
WARNING: Do not deform the brake tube.
CAUTION:
^
Before removal and installation the accelerator and brake pedals must be in the forward most position (closest to the floor). This is to align the
base position of the accelerator and brake pedals.
^
Do not disassemble the brake pedal adjusting mechanism.
^
Avoid damage from dropping the brake pedal assembly during handling.
^
Keep the brake pedal assembly away from water.
1. Remove the lower driver instrument panel.
2. Remove the Stop lamp switch and ASCD switch from the pedal assembly.