QX56 V8-5.6L (VK56DE) (2004)
^
Install so that dowel pin at the front of camshaft face is in the direction shown.
3. Install camshaft brackets.
^
Install by referring to installation location mark on upper surface.
^
Install so that installation location mark can be correctly read when viewed from the intake manifold side.
^
Install No.1 camshaft bracket using the following procedure:
-
Apply liquid gasket to No.1 camshaft bracket as in illustration. Use Genuine RTV Silicone Sealant or equivalent.
CAUTION:
^ After installation, be sure to wipe off any excessive liquid gasket leaking from part "A" and "B" (both on right and left sides).
^ Remove completely any excess of liquid gasket inside bracket.