QX56 V8-5.6L (VK56DE) (2004)
3. Remove oil strainer from oil pan (upper).
4. Remove oil pan (upper).
a. Loosen bolts in reverse order of illustration to remove.
b. Using a suitable tool insert into the gap between cylinder block and front cover indicated by the arrow in illustration, and pry it. Remove oil
pan (upper).
CAUTION: Use care not to damage mating surface.
5. Remove O-rings from oil pump and front cover.
INSPECTION AFTER REMOVAL
Clean oil strainer.
INSTALLATION
1. Install oil pan (upper) in the order.
a. Apply liquid gasket thoroughly as in illustration.