QX56 V8-5.6L (VK56DE) (2004)
Front Crankshaft Seal: Service and Repair
Removal and Installation of Front Oil Seal
REMOVAL
1. Remove the engine.
2. Remove crankshaft pulley.
3. Remove the front oil seal using a suitable tool.
CAUTION: Be careful not to damage front cover and oil pump drive spacer.
INSTALLATION
1. Using a suitable tool, install front oil seal onto front cover.
NOTE: Apply engine oil on new front oil seal.
^
Install new front oil seal in the direction as shown.
CAUTION: Be careful not to scratch or make burrs on circumference of front oil seal.
2. Installation of the remaining components is in the reverse order of removal.