QX56 V8-5.6L (VK56DE) (2004)
13. Using a suitable tool to assist, loosen bolts securing camshaft sprocket to remove camshaft sprocket.
CAUTION: To avoid interference between valves and pistons, do not turn crankshaft or camshaft when timing chain is disconnected.
14. Repeat the same procedure to remove the right timing chain and associated parts.
INSPECTION AFTER REMOVAL
Check for cracks and any excessive wear at link plates. Replace chain if necessary.
^
In the same way as for left bank, inspect timing chain and associated parts on right bank.
INSTALLATION
NOTE:
^
The above figure shows the relationship between the mating mark on each timing chain and that of the corresponding sprocket, with the
components installed.