QX56 V8-5.6L (VK56DE) (2004)
7. Install oil pump drive spacer as follows:
^
Install so that front mark on front edge of oil pump drive spacer faces the front of engine.
^
Insert oil pump drive spacer according to the directions of crankshaft key and the two flat surfaces of oil pump inner rotor.
^
If the positional relationship does not allow the insertion, rotate oil pump inner rotor with a finger to allow the oil pump drive spacer.
8. Using a suitable tool, install front oil seal.
CAUTION: Be careful not to scratch or make burrs on the circumference of the oil seal.
9. Install chain tensioner cover.
^
Apply liquid gasket as shown in the figure.
Use Genuine RTV Silicone Sealant or equivalent.
10. Install front cover as follows:
a. Install new O-ring on cylinder block.