QX56 V8-5.6L (VK56DE) (2004)
8. Measure valve clearances at locations marked "x" as shown in the table (locations indicated with white arrow)
^
No.3 cylinder compression TDC
9. Turn crankshaft pulley clockwise by 90° degrees from the position of No. 3 cylinder compression TDC (clockwise by 360° degrees from the
position of No. 1 cylinder compression TDC) to measure intake and exhaust valve clearances of No. 6 cylinder and exhaust valve clearance of
No.2 cylinder.
10. If out of specifications, adjust as necessary,