QX56 V8-5.6L (VK56DE) (2004)
Figure E-1
NOTE:
Maxi Fuse is installed only when replacing the fan motor assembly with a new one. The battery should already be disconnected and the radio
station presets should have been recorded before removing the fan motor at the beginning of procedure C.
Figure E-2
1. Remove the IPDM E/R upper cover.
-
IPDM E/R = Intelligent Power Distribution Module, Engine Room.
2. Remove the relay and fuse cover.
3. Disconnect the white connector circled in Figure E-3.
-
This is connector E120.
-
This connector has 6 terminal slots with only 5 filled.
Figure E-3