QX56 V8-5.6L (VK56DE) (2004)
^
Do not install more than three sheets of balance weights.
c. If calculated balance weight value exceeds 50 g (1.76 oz), install two balance weight sheets in line with each other as shown.
CAUTION: Do not install one balance weight sheet on top of another.
3. Start wheel balancer again.
4. Install drive-in balance weight on inner side of road wheel in the wheel balancer indication position (angle).
CAUTION: Do not install more than two balance weights.
5. Start wheel balancer. Make sure that inner and outer residual imbalance values are 10 g (0.35 oz) each or below.
^
If either residual imbalance value exceeds 10 g (0.35 oz), repeat installation procedures.
Wheel balance (Maximum allowable imbalance)