QX56 V8-5.6L (VK56DE) (2004)
Electronic Throttle Actuator: Testing and Inspection
Component Inspection
THROTTLE CONTROL MOTOR
1. Disconnect electric throttle control actuator harness connector.
2. Check terminals between terminals 5 and 6.
Resistance: Approximately 1 - 15 Ohms [at 25 °C (77 °F)]
3. If NG, replace electric throttle control actuator and go to next step.
4. Perform "Throttle Valve Closed Position Learning".
5. Perform "Idle Air Volume Learning".