QX56 V8-5.6L (VK56DE) (2004)
^
This will add the data you selected to the File(s) Selected list.
4.
Write the "To" number on the Repair Order.
5.
Click on Continue and follow directions to perform Data transfer (download) from ASIST into CONSULT-II.
Step Two: Preparation Steps Before Reprogramming ECM
1.
Connect a battery charger to the vehicle's battery. Set the charger to a low charge rate (trickle charge).
CAUTION:
For number 2 below and number 3, DO NOT connect the CONSULT-II A/C Power Supply.
2.
Press [SUB MODE] (see Figure C) then:
a.
From the listed items find and select [BATTERY CHARGE].