QX56 V8-5.6L (VK56DE) (2004)
Control Module: Service and Repair
TRANSFER CONTROL UNIT
Removal and Installation
REMOVAL
1. Turn ignition switch OFF and disconnect negative battery terminal.
2. Remove the glove box assembly.
3. Disconnect transfer control unit connectors.
4. Remove the transfer control unit.
INSTALLATION
Installation is in the reverse order of removal.
^
When installing the transfer control unit, tighten bolts to the specified torque.
Transfer control unit bolts: 5.1 Nm (0.52 kg-m, 45 inch lbs.)