QX56 V8-5.6L (VK56DE) (2004)
Air Bag(s) Arming and Disarming: Service and Repair
Precautions for SRS "AIR BAG" and "SEAT BELT PRE-TENSIONER" Service
-
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
-
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes.
For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not
work on any SRS connectors or wires until at least 3 minutes have passed.
After testing is completed, See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and
Associated Procedures/Manufacturer Code Charts/Air Bag System/Diagnostic Procedures/SRS Operation Check (Procedure 1)
After repairs have been completed, See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code
Tests and Associated Procedures/Manufacturer Code Charts/Air Bag System/Diagnostic Procedures/Trouble Diagnosis with CONSULT-II/Diagnostic
Procedure 3