QX56 V8-5.6L (VK56DE) (2004)
REMOVAL AND INSTALLATION
REMOVAL
1. Remove the D-ring anchor bolt cover and D-ring anchor bolt.
2. Remove the lower anchor bolt cover and lower anchor bolt.
3. Remove the upper and lower luggage side finishers.
4. Remove the seat belt retractor anchor bolt, LH side, and seat belt retractor and belt assembly.
5. Remove the seat belt retractor anchor nut, RH side, and seat belt retractor and belt assembly.
6. Remove seat belt buckle anchor bolt from seat belt anchor base and remove seat belt buckles.
INSTALLATION
Installation is in the reverse order of removal.
-
Ensure that seat belt height adjuster is locked in the lowest position during installation.
-
Seat belt anchor base should be flat to the floor during installation and not on the anti-rotation bead.
Third Row Center
REMOVAL AND INSTALLATION
REMOVAL
1. Remove the rear roof finisher.
2. Lower the rear portion of the headliner.
3. Remove the seat belt retractor anchor bolts and seat belt retractor and belt assembly.
INSTALLATION
Installation is in the reverse order of removal.