QX56 V8-5.6L (VK56DE) (2004)
The wire colors are as shown.
NOTE:
^
Refer to NTB03-078 for complete details on using the Flameless Heat Gun and Solder Sleeve Connectors.
^
Refer to "Quick Reference for Using Solder Sleeve Connectors" as a quick reference for using these tools.
5.
Bundle or fold the repaired wires to the correct length as follows:
Drivers Side
^
Measure from the branch point to the back of the connector.
^
Length: 135 mm +/- 5 mm
^
Use one piece of vinyl tape to temporarily hold the wires in place while adjusting the length.
Passenger Side