QX56 V8-5.6L (VK56DE) (2004)
Suspension Strut / Shock Absorber: Service and Repair
Front Suspension Strut
Removal and Installation
REMOVAL
1. Remove the wheel and tire using power tool.
2. Remove the shock absorber lower bolt using power tool.
3. Remove the three shock absorber upper mounting nuts using power tool.
4. Remove the coil spring and shock absorber assembly. Turn steering knuckle out to gain enough clearance for removal.
INSTALLATION
Installation is in the reverse order of removal.
^
The step in the shock absorber assembly lower seat faces outside of vehicle.
^
Tighten all nuts and bolts to specification.
^
When installing wheel and tire, refer to "Rotation".
Disassembly and Assembly
DISASSEMBLY
1. Set the shock absorber in a vise, then loosen (without removing) the piston rod lock nut as shown.
CAUTION: Do not remove piston rod lock nut at this time.