infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Body - Outside Door Handle Freezes in Extreme Cold|Page 14290 > < Body - Outside Door Handle Freezes in Extreme Cold|Page 14288
Page 5
background image

^

When you connect the Outside Handle Cable to the Outside Handle Bracket make sure the Cable is routed as shown in Figures 1b and 1c as
shown.

Re-Install Removed Parts

6.

Re-install all previously removed parts in the reverse order.

NOTE:

^

On 2005 MY vehicles install a new screen sealer to the door before the door finisher is re-installed.

^

The screen sealer is a foam watershield that goes between the door and the door finisher.

^

Screen sealer is listed in the Parts Information.

Operation Check

7.

Check the following items for proper operation:

^

Inside / outside door handle operation

^

Power / manual door lock / unlock operation

^

Power window switch operation

Disclaimer

Technical Service Bulletin # 05-065A

Date: 060301

Body - Outside Door Handle Freezes in Extreme Cold

Classification:
BT05-047a

Reference:
ITB05-065a

Date:
March 1, 2006

2004-2005 QX56; OUTSIDE DOOR HANDLE CABLE FREEZES; DOOR DIFFICULT TO CLOSE IN COLD TEMPERATURES

This bulletin has been amended. Step 6 in the Service Procedure has been modified and the Parts Information has been updated. No other content has
been changed.

Discard all previous versions of this bulletin.

APPLIED VEHICLES:
2004 - 2005 QX56 (JA60) - front doors only

IF YOU CONFIRM

The inside handle will open the door but the outside handle

^

will not open the door

^

is difficult to operate (stuck)

^

does not move freely

and/or

Body - Outside Door Handle Freezes in Extreme Cold|Page 14290 > < Body - Outside Door Handle Freezes in Extreme Cold|Page 14288