QX56 AWD V8-5.6L (VK56DE) (2005)
1. Access the power back door motor assembly.
^ Remove left side finishers as needed.
^ Refer to the Service Manual as needed, (section BL 2004 - 07, section DLK 2008 - 2010).
^ Bolt A shown in Figure 1 will need to be removed.
NOTE:
You may not need to completely remove the lower luggage finisher. Unclipping the top and pulling it back may give you enough access.
2. Check bolt "B" (see Figure 1).
^ If bolt B is loose or missing, replace it with a new one.
^ New bolt is listed in the parts information.
^ Apply Permatex(R) Medium Strength Threadlocker BLUE (or equivalent) to the threads of the new bolt and torque bolt to: 5.7 N·m (0.6 kg-m, 51
in-lb)