QX56 AWD V8-5.6L (VK56DE) (2005)
^
June 30 2004 / VIN 5N3M08(**)4N 807755
For vehicles built before the above dates and VIN's, go to Step 5 below: Check the Torque Member Version.
Step 5
Step 5: Check Torque Member Version (mold or new).
A.
Clean the surface on the bosses of the torque member mounting bolt holes-hub side (see Figure 3).
B.
Look for the dots (round indent marks) on the bosses (see Figure 3).
^
If there's dots on both bosses it's the new version. Skip to Step 7: Install New Front Brake Pads.
^
If there's dots on only one boss its the old version. Go to Step 6 : Install New Torque Member Kits.
Step 6
Step 6: Install New Torque Member Kits.
NOTE:
This step is for vehicles with the old torque member version (see Step 5).