QX56 AWD V8-5.6L (VK56DE) (2005)
2. Apply brake fluid to piston and piston boot, then install piston boot in to piston groove.
CAUTION: Do not reuse piston boot.
3. Insert into cylinder body by hand and insert piston boot piston-side lip into piston groove.
CAUTION: Press piston evenly and vary the pressing point to prevent cylinder body inner wall from being rubbed.
4. Install sliding pins and sliding pin boots to torque member.
CAUTION: Trailing/upper sliding pin must be replaced at each service.
5. Install cylinder body Tighten sliding pin bolt to the specified torque. Refer to "Components".