QX56 AWD V8-5.6L (VK56DE) (2005)
Brake Master Cylinder: Service and Repair
Disassembly and Assembly
Disassembly and Assembly
DISASSEMBLY
CAUTION:
^
Master cylinder cannot be disassembled.
^
Remove reservoir tank only when absolutely necessary.
Pull reservoir tank off master cylinder sub-assembly, then remove grommets from master cylinder sub-assembly body.
ASSEMBLY
CAUTION:
^
Never use mineral oil such as kerosene, gasoline during the cleaning and assembly process.
^
Do not drop parts. If a part is dropped, do not use it.
1. Apply brake fluid or rubber grease to new grommets, then insert into master cylinder sub-assembly. Refer to "RECOMMENDED CHEMICAL
PRODUCTS AND SEALANTS".
CAUTION: Do not reuse grommet.
2. Install reservoir tank onto master cylinder sub-assembly.