QX56 AWD V8-5.6L (VK56DE) (2005)
3. Install the camshaft brackets.
^
Install by referring to the installation location mark on the upper surface.
^
Install so that the installation location mark can be correctly read when viewed from the intake manifold side.
^
Install No. 1 camshaft bracket using the following procedure:
-
Apply liquid gasket to No. 1 camshaft bracket as shown. Use Genuine RTV Silicone Sealant or equivalent. Refer to "Recommended
Chemical Products and Sealants".
CAUTION:
^
After installation, be sure to wipe off any excessive liquid gasket leaking from part "A" and "B" (both on right and left sides).
^
Remove completely any excess of liquid gasket inside bracket.
-
Apply liquid gasket to the back side of the front cover as shown. Use Genuine RTV Silicone Sealant or equivalent. Refer to
"Recommended Chemical Products and Sealants".