QX56 AWD V8-5.6L (VK56DE) (2005)
/Page-643001.png)
Connecting Rod: Specifications
Tightening Torques & Sequences
Rod Bearing Cap
Tighten connecting rod bolts using Tool.
Tool number: KV10112100 (BT-8653-A)
Connecting rod bolts
Step 1 ................................................................................................................................................................................. 19.6 Nm (1.5 kg-m, 11 ft. lbs.)
Step 2 ........................................................................................................................................................................................................... 90° clockwise
After tightening bolts, make sure the crankshaft rotates smoothly.
Check connecting rod side clearance. Refer to "CONNECTING ROD SIDE CLEARANCE"
CONNECTING ROD BOLT DIAMETER
^
Measure diameter "d" at position shown.
^
When "d" is out of specifications (when it becomes thinner), replace bolt with a new one.
Limit: 7.75 mm (0.3051 inches) or less.
