QX56 AWD V8-5.6L (VK56DE) (2005)
/Page-687003.png)
1. Install the oil pan (upper) using the following steps.
a. Apply liquid gasket thoroughly as shown. Use Genuine RTV Silicone Sealant or equivalent. Refer to "Recommended Chemical Products and
Sealants".
CAUTION: Apply liquid gasket to outside of bolt hole for the hole shown by [star].
b. Install new O-rings to the oil pump and front cover side.
c. Tighten the bolts in numerical order as shown.
M6 x 30 mm (1.18 inches) : No. 15, 16
M8 x 25 mm (0.98 inches) : No. 1, 3, 5, 7, 11, 13
M8 x 45 mm (1.77 inches) : No. 2, 4, 6, 8, 10, 14
M8 x 123 mm (4.84 inches) : No. 9, 12
d. Install rear plate cover.
2. Install the oil strainer to the oil pan (upper).
3. Install the oil pan (lower).
a. Apply liquid gasket thoroughly as shown. Use Genuine RTV Silicone Sealant or equivalent. Refer to "Recommended Chemical Products and
Sealants".
