QX56 AWD V8-5.6L (VK56DE) (2005)
5. Secure the band clamp with the hex bolt located on the side (or on top if needed). See Figure 1 above for example.
WARNING:
Do Not install the hex bolt on the bottom of the exhaust tube.
^ Band clamp hex bolt torque: 4.0 - 5.5 Nm (0.4 -0.56 Kg-m 2.9 - 4.0 ft.lb)
6. After securing the band clamp cut off the clamp's excess at the end.
^ Wrap the end of the band clamp over the hex bolt and then cut off the excess band clamp within 5 mm (0.2 inches) past the hex bolt (see Figure 2).
WARNING:
Be careful of sharp edges after cutting off the excess band clamp.
7. After band clamp(s) installation road test the vehicle to verify the repair.