QX56 AWD V8-5.6L (VK56DE) (2005)
8. Wrap the long strip of protector 3 completely around the motor.
Figure D-11
9. Press and smooth all parts of protector 3. Make sure it is completely stuck to the fan motor.
-
Pay special attention to the area shown in Figure D-11. Make sure there is good adhesion in this area.
NOTE:
The large support ribs on the fan shroud are labeled 1 o'clock, 5 o'clock, 7 and 11 o'clock for reference when installing parts on to the fan
shroud.
10. Thoroughly clean all dirt and debris from the fan shroud between the 1 o'clock and 5 o'clock ribs (see Figure D-12).
-
Use a locally approved brake cleaner and a clean rag.