QX56 AWD V8-5.6L (VK56DE) (2005)
c. Remove the brown Fuel Temperature Sensor from the white plastic retaining clip.
d. Remove the two Fuel Temperature Sensor wires from the securing tab.
e. Unplug the white 3-wire connector at the top of the fuel pump.
^
Do NOT disturb the black 2-wire connector.
f. Carefully cut the tie-wrap securing the harnesses to the black corrugated tubing.
CAUTION:
Do NOT damage the wires, wire insulation, or the tubing when cutting the Tie-Wrap.