QX56 AWD V8-5.6L (VK56DE) (2005)
Power Distribution Module: Reading and Clearing Diagnostic Trouble Codes
CONSULT-II Function IPDM E/R
CONSULT-II BASIC OPERATION
CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending
on control unit which carry out CAN communication.
1. With the ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to the data link connector, then turn ignition switch ON.
2. Touch "START (NISSAN BASED VHCL)".
3. Touch "IPDM E/R" on "SELECT SYSTEM" screen.
-
If "IPDM E/R" is not displayed, print "SELECT SYSTEM" screen, then refer to GI-38, "CONSULT-II Data Link Connector (DLC) Circuit".
See: Diagrams/Electrical Diagrams/Powertrain Management/Data Link Connector/Data Link Connector Schematic