QX56 AWD V8-5.6L (VK56DE) (2005)
Fuel Gauge Sender: Service and Repair
FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL PUMP ASSEMBLY
Removal and Installation
REMOVAL
WARNING: Follow the "General Precautions" before working on the fuel system. Refer to "General Precautions".
1. Remove the fuel filler cap to release the pressure from inside the fuel tank.
2. Check the fuel level on level gauge. If the fuel gauge indicates more than the level as shown (full or almost full), drain the fuel from the fuel tank
until the fuel gauge indicates the level as shown, or less.
-
If the fuel pump does not operate, use the following procedure to drain the fuel to the specified level.
a. Insert a suitable hose of less than 15 mm (0.59 in) diameter into the fuel filler pipe through the fuel filler opening to drain the fuel from
fuel filler pipe.