QX56 AWD V8-5.6L (VK56DE) (2005)
10.
Connect (solder) the buckle pre-tensioner wires you just cut to the new buckle pre-tensioner harness wires.
^
The New buckle pre-tensioner harnesses for the left and right side are different. Be sure to use the correct new buckle harness for the side
you're working on.
^
Use Solder Sleeve Connectors (listed in the Parts Information) and Flameless Heat Gun - J-45538.
NOTE:
^
Refer to NTB03-078 for complete details on using the Flameless Heat Gun and Solder Sleeve Connectors.
^
Refer to "Next Step" as a quick reference for using these tools.
Quick Reference for Using Solder Sleeve Connectors