QX56 AWD V8-5.6L (VK56DE) (2005)
Alignment: All Technical Service Bulletins
Steering/Suspension - Front Wheel Alignment Cam Bolts
Classification: FA05-003C
Reference: ITB05-060C
Date: june 2, 2010
2005-2010 QX56; CAM BOLTS FOR FRONT WHEEL ALIGNMENT
This bulletin has been amended. Applied Vehicles, Actions, and Parts Information have been updated. Please discard previous versions of this bulletin.
APPLIED VEHICLE:
2005 - 2010 QX56 (JA60)
APPLIED VIN:
2005 vehicles built after 5N3AA08(**)5N 811771
2006 - 2010 vehicles: All VINs
APPLIED DATE:
Vehicles built after June 2, 2005
IF YOU CONFIRM
An Applied Vehicle needs to have the front wheel alignment adjusted,
NOTE:
Applied Vehicles listed above come from the factory with non-adjustable bolts (Not Cam Bolts) for the lower link (lower control arm) mounting.
ACTIONS
1. Remove the original lower link mounting bolts, washers, and nuts - 2 per side.
^ Refer to section FSU in the Electronic Service Manual (ESM) for lower link mounting bolt locations.
2. Install new bolts (cam bolts), cam washers and new nuts.
^ New parts are listed in the Parts Information section of this bulletin.
NOTE:
Cam bolts are used to adjust caster and camber.
3. Perform front wheel alignment per the ESM.
PARTS INFORMATION