QX56 AWD V8-5.6L (VK56DE) (2005)
/Page-2017002.png)
3. Remove the piston rod lock nut.
^
Discard the piston rod lock nut, use a new nut for assembly.
Shock Absorber Assembly
Shock Absorber Assembly
^
Check for smooth operation through a full stroke, both compression and extension.
^
Check for oil leakage on welded or gland packing portions.
^
Check piston rod for cracks, deformation or other damage and replace if necessary.
Mounting Insulator and Rubber Parts
Mounting Insulator and Rubber Parts
Check cemented rubber-to-metal portion for separation or cracks. Check rubber parts for deterioration and replace if necessary.
Coil Spring
Coil Spring
^
Check for cracks, deformation or other damage and replace if necessary.
^
Check the free spring height.
Front spring free height
4x2: 325.5 ± 3 mm (12.8 ± 0.1 inch)
4x4: 335.0 ± 3 mm (13.2 ± 0.1 inch)
Assembly
ASSEMBLY
1. When installing coil spring on shock absorber, it must be positioned as shown.
2. Install upper mounting insulator as shown in line with lower shock absorber mount and step in shock absorber lower seat.
^
The step in the shock absorber lower seat faces outside of vehicle.
3. Tighten the piston rod lock nut to specification.
