QX56 AWD V8-5.6L (VK56DE) (2005)
PARTS INFORMATION
CLAIMS INFORMATION
Submit a Primary Failed Part (PP) line claim using the claims coding shown.
Additional Procedure Information: (Applies ONLY to early type cooler lines)
IMPORTANT:
You must remove all 4 hose clamps that come installed on the cooler lines and discard them. You must use (install) the new hose clamps that are
listed in the Parts Information.
^
Thoroughly clean the metal tubes before installing the new Cooler Lines. Remove any ATF or other debris.
^
Install the cooler line rubber hoses on the metal tubes as shown in Figure 2.
a = 30 to 33 mm (1.2 to 1.3 in)
b = 3 to 5 mm (0.1 to 0.2 in)