QX56 AWD V8-5.6L (VK56DE) (2005)
Seals and Gaskets: Service and Repair
Rear Oil Seal
REMOVAL AND INSTALLATION
Removal
1. Remove rear propeller shaft.
2. Remove transfer from transmission (4WD models).
3. Remove rear oil seal using a flat-bladed screwdriver or suitable tool.
CAUTION: Be careful not to scratch rear extension assembly (2WD models) or adapter case assembly (4WD models).
Installation
CAUTION: After completing installation, check for A/T fluid leakage and fluid level.
1. Install new rear oil seal into the extension case (2WD models) or adapter case (4WD models) until it is flush with component face, using Tool or
suitable drift.
CAUTION: