QX56 AWD V8-5.6L (VK56DE) (2005)
CLAIMS INFORMATION
Submit a Primary Failed Part (PP) line claim using the claims coding shown.
SERVICE PROCEDURE
1.
Disconnect connector F9 (see Figure 1).
Connector F9 is located on the right side (passenger side) of the transmission.
2.
Inspect the connector for water or corrosion.
^
If no water or corrosion is found in the connector this bulletin does not apply. Go back to ASIST for further diagnostics and repair information.
^
If there is water or corrosion in the connector complete step 3 and 4.