QX56 AWD V8-5.6L (VK56DE) (2005)
Seals and Gaskets: Service and Repair
Front Oil Seal
FRONT OIL SEAL
Removal and Installation
REMOVAL
1. Partially drain the transfer fluid.
2. Remove the front propeller shaft.
3. Remove the companion flange self-lock nut, using Tool.
Tool number: KV40104000
4. Put a matching mark on top of the front drive shaft in line with the mark on the companion flange.
CAUTION: Use paint to make the matching mark on the front drive shaft. Do not damage the front drive shaft.
5. Remove the companion flange, using suitable tool.
6. Remove the oil seal from the front case, using Tool.