QX56 AWD V8-5.6L (VK56DE) (2005)
Wiper Arm: Service and Repair
Rear Wiper Arms
Removal and Installation of Rear Wiper Arm, Adjustment of Rear Wiper Arm Stop Location
REMOVAL
1. Operate the rear wiper motor and stop it at the auto stop position.
2. Remove rear wiper arm cover by gripping bottom edge and rotating cover up. Remove mounting nut, and remove the wiper arm.
INSTALLATION
1. Prior to wiper arm installation, turn on wiper switch to operate wiper motor and then turn it "OFF" (Auto Stop).
2. Clean up the pivot area as illustrated. This will reduce the possibility of wiper arm looseness.
3. Install rear wiper arm so that the arm rests in the stopper and tighten wiper arm nut to specification.
Rear wiper arm nut : 10.2 Nm (1.0 kg-m, 8 ft-lb)