QX56 RWD V8-5.6L (VK56VD) (2011)
5. When ECM reprogramming is complete, the screen in Figure 2 displays.
NOTE:
If the screen in Figure 2 does NOT display (reprogramming does NOT complete).
6. Make sure to erase DTCs from all Systems.
^ During reprogramming DTCs will set in several systems and must be erased before TCM reprogramming.
7. Go to TCM Reprogramming below.
TCM Reprogramming
1. Restart the C-III session by selecting the "Home" icon in the upper left corner of the C-III screen.
^ Make sure to erase DTCs from all systems.
^ TCM initialization is not needed for 7 speed A/T reprogramming.
Reprogramming Caution