Amigo 2WD V6-3.2L (1999)
Power Door Lock Control Module: Service and Repair
Disassembly and assembly of the transmitter include details of spare parts and replacement procedure for defective parts found through troubleshooting.
Each part is a precise electronic components to handle with care.
Spare Parts And Replacement Procedure For Malfunctioning Parts:
For malfunctioning transmitter:
1. Prepare a new transmitter (1).
2. Programs VAC (Vehicle Access Code) (2).
3. Check that the door lock remote control operation works (3). (4).
For malfunctioning battery:
1. Prepare new batteries (1) (Type : CR2016x2).
2. Remove the batteries from transmitter (2).
3. Install a new batteries into transmitter.
4. Check that the door lock remote control operation works.