Amigo 2WD V6-3.2L (1999)
4. Install valve spring to cylinder head. Attach the valve spring to the lower spring seat. The painted area of the valve spring should be facing
downward.
5. Install lower valve spring seat, valve spring and upper valve spring seat then put split collars on the upper spring seat, using the J-48062 valve
spring compressor and J-42898 valve spring compressor adapter to install the split collars.
6. Install tappet with shim.
7. Install camshaft assembly.
Refer to installation procedure for Camshaft.
Valve Clearance Adjustments