Amigo 2WD V6-3.2L (1999)
Idle Air Control Valve: Testing and Inspection
Measurement Procedure
-
In order to install a new IAC valve, measure the distance between the tip of the pintle and the mounting flange. If that measurement is 28 mm (1.1
in.) or less, the valve needs no adjustment. If the measurement is greater than 28 mm (1.1 in.), apply finger pressure and retract the valve. The
force required to retract the pintle on a new valve will not damage the valve, shaft, or pintle.
NOTE: Do not push or pull on the IAC valve pintle on IAC valves that have been in service. The force required to move the pintle may damage
it.
IMPORTANT: Use an identical replacement part in order to replace a valve. IAC valve pintle shape and diameter are designed for the specific
application.
