Amigo 2WD V6-3.2L (1999)
Steps 12 - 20
Test Description
9.
A faulty EGR valve can leak a small amount of current from the ignition feed circuit to the 5-volt reference A circuit. If the problem does not
exist with the EGR valve disconnected, replace the EGR valve.
11-15.
If a sensor input circuit has been shorted to voltage, ensure that the sensor has not been damaged. A damaged IAT or ECT sensor will continue
to indicate a high voltage or a low temperature after the affected circuit has been repaired. A damaged TP, MAP, fuel tank pressure, or EGR
pintle position sensor will indicate a high voltage, a low voltage, or a fixed value after the affected circuit has been repaired. If the sensor has
been damaged, replace it.
